SKBS steel super speed Waste Oil Burner / high temperature burnerFlat Flame And Low Speed Burner abroad apply to metallurgy,
ceramics, fire brick, glass, electronic ceramics, special ceramics
Mixer body: cast iron or cast aluminium
Gas tube: stainless steel 304 or 310
Pre-heated air(cast iron body) up to 450
Pre-heated air(cast aluminium body) up to 300
for different types of gas: NG/LPG/MG/TG/etc.
Brick standard refractory block, max.. temp.: 1750
Capacity range: up to 3000kw
Excellent flame stability:
on ratio firing
Low NOx level.NOx
Wall mounting flanges to fasten the block holder to the
furnace shell are threaded to allow for positioning
of accessories:pilot burner, flame detectors
(electrodes or UV detector).
Separated air and gas inlets, mixing at discharge point,
Skbs gas burners are nozzle-mixing units with a high velocity,
spinning, air flow. The swirling air stream produces an
anticlockwise vapidly, producing intense combustion.The inverted
parabolic shape of the burner block port works with the vortex to
pull flames flat to the furnace wall ta firing rates and mixtures.
Maximum furnace temperatures are obtained at high-fire with
stoichiometric air and gas flows. Excess air operation allows for
obtaining quite cold flame temperatures without changing the
volumes of the fuel gas.